| |
Product SKUs |
| AS-1041A-T2F | A+ Server 1041A-T2F (Black) |
| |
Motherboard |
| Super H8QIi+-F |
| |
Processor/Chipset |
| CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors **
- HT3.0 Link support
|
| Chipset | AMD SR5690 / SP5100 |
| |
System Memory |
| Memory Capacity | - Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SATA | - AMD SP5100 SATA2 (3 Gb/s) Controller
- 6 SATA2 Ports
- SATA RAID 0, 1, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Super I/O | Winbond® 83627DHG chip |
| VGA | Matrox G200eW with 16MB DDR |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 dedicated LAN support IPMI
|
| USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant
- 2 Rear Ports
- 2 Internal Headers, 2 Type A
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
|
| VGA | 1x VGA port |
| |
System BIOS |
| BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC818TQ+-1000 |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705 mm) |
| Gross Weight | 43 lbs (19.5 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots |
| PCI-Express | 1 x16 PCI-e Slot |
| HyperTransport | 1 HyperTransport (HTX) Connectors |
| |
Drive Bays |
| Hot-Swap | 3 x 3.5" Hot-swap SATA drive bays |
| |
SATA Backplane |
| 1U SATA Backplane |
| |
Peripheral Drives |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM drive |
| |
System Cooling |
| Fans | 6x heavy-duty counter-rotating fans with optimal fan speed control |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| 1000 W AC-DC high-efficiency power supply w/ PFC + PDB |
| AC Voltage | 100 - 240 V, 50 - 60 Hz, 15 - 7 A |
| +5 V standby | 4 A |
| +12 V | 83 A |
| With Power Distributor | - +5 V: 20 A
- +3.3 V: 20 A
- -12V: 0.6 A
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- Support 4-pin fans with fan-speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PC Temperature Sensing Logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
