|
Product SKUs |
AS-1022G-NTF | A+ Server 1022G-NTF (Black) |
|
Motherboard |
Super H8DGU-F |
|
Processor/Chipset |
CPU | - Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| 3.2GHz Hyper-Transport (HT3) link |
Chipset | AMD chipset SR5670 / SP5100 |
Note | Supports 6000 processors with Max ACP 80W (TDP 115W) |
|
System Memory |
Memory Capacity | - 16 DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type | DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200 16MB DDR2 |
Super I/O | Winbond 83527 chip |
|
Expansion Slots |
1U | 2x PCI-e 2.0 x8 slots |
|
Input / Output |
SATA | 4x SATA2.0 (3Gb/s) Ports |
LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated LAN supports IPMI
|
USB | - 7x USB 2.0 ports
- 2x Rear, 4x header, 1x Type A
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
Others | 1 UID |
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | SC815TQ-563UB |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 25.6" (650mm) |
Gross Weight | 36 lbs (16.4 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- (UID LED)
|
Ports | 2x USB & DB9 COM port tray |
|
Drive Bays |
Hot-Swap | - 4x 3.5" SATA Hot-swap drive trays
- Enterprise SATA HDD only recommended
|
|
Peripheral Drives |
DVD-ROM | Slim DVD-ROM drive |
|
SAS / SATA Backplane |
1x 1 U SAS / SATA Backplane |
|
System Cooling |
Fans | 4x 4 cm Counter-rotating PWM fans |
|
Power Supply |
560 W AC power supply w/ PFC (24-pin) |
AC Voltage | 100-240 V, 50-60 Hz, 7.5 A max |
+5 V | 18 A |
+5 V standby | 3 A |
+12 V | 46 A @ 100-180 V; 49 A @ 180-240 V |
-12 V | 0.5 A |
+3.3 V | 15 A |
Certification | Gold Certified |
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
FAN | - Total up to 8-fan status tachometer monitoring
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
- UID/Remote LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|