| |
Product SKUs |
| AS-2042G-6RF | A+ Server 2042G-6RF (Black) |
| |
Motherboard |
| Super H8QG6-F |
| |
Processor/Chipset |
| CPU | - Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| Chipset | AMD SR5690/SR5670/SP5100 Chipset |
| |
System Memory |
| Memory Capacity | - 32 DIMM sockets
- Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
| Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | - LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY
- RAID 5 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA | Matrox G200 16MB DDR2 graphics |
| Super I/O | Winbond® W83527 chip |
| |
Input / Output |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | - Integrated LSI 2008 SAS2 Controller
- Eight Serial Attached SCSI (SAS) ports
- Optional RAID 5 support
- 8x 6 Gb/s SAS / SATA ports
|
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 7x USB 2.0 ports
- 2x Rear, 4x internal header, and 1x type A
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-e 2.0 x16
- 2x PCI-e 2.0 x8
- 1x UIO slot
|
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | SC828TQ+-R1400LPB |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 27.9" (709 mm) |
| Gross Weight | 69 lbs (31.3kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| Ports | 2x USB Ports + DB9 COM Port (optional) |
| |
Drive Bays |
| Hot-Swap | 6 x 3.5" SAS / SATA Hot-swap drive trays (SAS or enterprise SATA HDD only recommended) |
| |
SAS / SATA Backplane |
| 1x 2 U SAS / SATA backplane w/ SES2 |
| |
System Cooling |
| Fans | 6x 80 mm 6500 RPM fans |
| |
Power Supply |
| Redundant 1400 W high-efficiency power supply with PMBus |
| AC Input | - 1200 W: 100 - 140 V, 50 - 60 Hz, 10.5 - 14.7 A
- 1400 W: 180 - 240 V, 50 - 60 Hz, 7.2 - 9.5 A
|
| DC Output +5 V standby | 6 A |
| DC Output +12 V | - 100 A @ 100-140 V
- 117 A @ 180-240 V
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, sVBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 9x fan connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
