| |
Product SKUs |
| MBD-C2SBC-Q
-O | - C2SBC-Q
- (Standard Retail Pack)
|
| MBD-C2SBC-Q
-B | |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6 ", (30.5cm x 24.4cm) |
| |
Processor/Cache |
| CPU | - Single LGA775 Socket
- Supports Intel® Core?2 Extreme QX9000/QX6000 series
- Supports Intel® Core?2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
|
| System Bus | 1333 / 1066 / 800 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
|
| Memory Type | DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | |
| Serial ATA | - Intel® ICH9DO SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers | - 1 x Intel® 82566DM & Intel® 82573L Dual Port Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
|
| Audio | Realtek ALC883 High Definition 5.1 Channel Audio |
| Video | On board graphics |
| Super I/O | 2x Winbond 83627DHG chips |
| Clock Generator | CK505 |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports ( 3Gbps performance)
- Six SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| LAN | 2x RJ45 LAN ports |
| USB | 12x USB 2.0 / 1.1 compatible (6x rear ports + 2x on-board + 2x headers) |
| Audio | - Realtek ALC883 High Definition 5.1 Channel Audio
- Line-in / Line-out / Microphone ports
|
| VGA | On board VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 3x Serial Header
|
| Parallel Port | 1x Parallel Port Header |
| |
Chassis ( Optimized for C2SBC-Q
) |
| Mid-Tower | - CSE-733E-465B
- CSE-733i-465B
- CSE-733T-465B
- CSE-733TQ-465B
|
| Important Note | To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
| |
Expansion Slots |
| PCI-Express | - 1x (x16) PCI-e slot
- 1 (x4)(using x8) PCI-e slot
|
| PCI | 5x 32-bit 33MHz PCI (5V) slots |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with Phoenix BIOS® |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
- Suspend to RAM (STR)
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
|
| FAN | - Total of three 4-pin fan headers
- 3 x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V standby alert LED
|
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 0° to 55°C
- Non-operating Temperature: -40° to 85°C
- Operating Relative Humidity: 15% to 95% (non-condensing)
- Non-operating Relative Humidity: 15 to 90% (non-condensing)
|
0 Articoli
