| |
Product SKUs |
| MBD-X9QRi-F+ -B | X9QRi-F+ (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 16.4" x 16.79" (41.66cm x 42.65cm) |
| |
Processor/Cache |
| CPU | - Intel Xeon processor E5-4600 v2 (12-Core)** or E5-4600 (8-Core) family
- Quad Socket R (LGA 2011)
- ** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
|
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 32x 240-pin DDR3 DIMM sockets
- Supports up to 1 TB DDR3 ECC registered memory (RDIMM) in 32 DIMM sockets
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Video | G200 (Nuvoton WPCM450 BMC with graphic controller) |
| Super I/O | Nuvoton W83527HG |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6Gb/s)
- 4x SATA 2.0 ports (3Gb/s)
|
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 8x USB 2.0 ports total(4 rear + 3 front + 1 Type A) |
| Video | 1x VGA port |
| Serial Port / Header | 2x Fast UART 16550 ports: 1 rear and 1 header |
| DOM | 1x DOM (Disk on Module) power connector |
| |
Chassis (Optimized for X9QRi-F+ ) |
| 2U Chassis | - CSE-828TQ-R1K43LPB
- (rev. M required, Air Shroud MCP-310-82805-0B)
|
| Tower / 4 U Rackmount | - CSE-418E16-R1K62B
- CSE-748TQ-R1K43B
- CSE-848E16-R1K62B
- (for SC748, rev. M required, Air Shroud MCP-310-74805-0B)
- (for SC848 & 418, rev. M required, Air Shroud MCP-310-84803-0B)
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended. |
| |
SuperServer(s) with X9QRi-F+ |
| Model(s) | - SYS-8017R-TF+
- SYS-8047R-TRF+
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x16 slots
- 2x PCI-E 3.0 x8 slots
|
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
- Optional IPMI 1.5 / 2.0
|
| Power Configurations | - ACPI / APM Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5 Phase-switching voltage regulator
|
| FAN | - 10x 4-pin fan headers
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | CPU / System Overheat LED |
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
0 Articoli
