| |
Product SKUs |
| SuperServer | SYS-5038MD-H8TRF (Black) |
| |
Motherboard |
| Motherboard | MBD-X10SDD-F |
| |
Processor/Cache |
| CPU | - IntelŽ XeonŽ processor D-1541
- Socket FCBGA 1667
- CPU TDP support 45W, 12MB, 8 Cores, 16 Threads, 2.1-2.7GHz
|
| |
System Memory (per node) |
| Memory Capacity | - 4x 288-pin DDR4 DIMM slots
- Supports up to 128 GB DDR4 ECC RDIMM
- Supports up to 64 GB DDR4 ECC UDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 RDIMM and ECC/Non-ECC UDIMM |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
Expansion Slots (per node) |
| PCI-Express | - 1x PCI-E 3.0 x8 Low-Profile slot
- 1x Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional
- 4x M.2 (2x PCI-E 3.0 x4 + 1x PCI-E 2.0 x4 + 1x PCI-E 2.0 x2)
|
| |
Network Devices (per node) |
| Micro-LP NIC | - Intel i350 GbE controller
- Dual RJ-45 connectors
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/O Acceleration Technology (I/O AT)
- MicroLP Adapter Matrix (Networking options)
|
| |
On-Board Devices (per node) |
| Chipset | System on Chip (SoC) |
| SATA | SATA3 (6Gbps) via SoC |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Headers | 1x Type A USB 3.0 |
| Graphics | ASPEED AST2400 Graphics (BMC with Graphic controller) |
| |
Input / Output (per Node) |
| SATA | 2x SATA-3 (6 Gb/s) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| KVM | 1x VGA, 1x COM and 2x USB 2.0 (with KVM dongle) |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Rear Window (each node) |
| Switch | Power / UID |
| |
Chassis |
| Form Factor | 3U |
| Model | CSE-938BH-R1K68B |
| |
Dimensions and Weight |
| Height | 5.21" (132 mm) |
| Width | 17.26" (438 mm) |
| Depth | 23.2" (589 mm) |
| Package | 11.65" (H) x 26.26" (W) x 34" (D) |
| Weight | - Net Weight: 62.2 lbs (28.21 kg)
- Gross Weight: 88 lbs (39.92 kg)
|
| Color | Black |
| |
Front Panel |
| Buttons | Power On/Off button |
| LEDs | |
| |
Drive Bays (per node) |
| Internal | - 2x 3.5" Hot-swap SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total
- Enterprise SATA HDD only recommended
|
| |
System Cooling |
| Fans | 4x 8cm Heavy duty fans with optimal cooling zone |
| |
Power Supply (76mm Width) |
| 1600W Redundant Power Supplies with PMBus |
| Total Output Power | 800W/1600W |
| Dimension(W x H x L) | 76 x 40.4 x 336 mm |
| Input | - 100-140Vac / 10-7A / 50-60Hz
- 180-240Vac / 11-8A / 50-60Hz
|
| +12 V | - Max: 66A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
| +5Vsb | Max: 1A / Min: 0A |
| Output Type | 27 Pairs Gold Finger Connector |
| Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
|
| FAN | Cooling zone |
| Temperature | Monitoring for CPU and chassis environment |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
