| |
Product SKUs |
| SBI-7126T-T1E | Processor Blade SBI-7126T-T1E (Black) |
| |
Motherboard |
| Super B8DTL-E |
| |
Processor/Cache |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeon processor X5600/E5600/L5600 Series (Westmere) 40 W - 95 W
- Intel Xeon processor X5500/E5500/L5500 Series (Nehalem-EP) 38 W - 95 W
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 6x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
| Memory Voltage | 1.5 V and 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1 support
|
| InfiniBand Support | 4x QDR / DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional) |
| IPMI | Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM) |
| Network Controllers | - Intel 82576 Dual-Port Gigabit Ethernet
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Super I/O | Winbond 83527HF chip |
| Clock Generator | CK505 chip |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Dimensions |
| Height | 11.32" (288 mm) |
| Width | 1.67" (42.4 mm) |
| Depth | 18.9" (480mm) |
| Weight | 8.6 lbs (3.9 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- KVM button
|
| LEDs | - Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
| Connector | SUV (Serial/USB/Video) & KVM Connector |
| |
Drive Bays |
| Hot-Swap | 2x 3.5" SATA Hot-swap drive bays |
| |
Input / Output |
| KVM | 1 Front Connector for Supermicro KVM Card |
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
Electromagnetic Compatibility (EMC) |
| United States / Canada | FCC- Emissions (US) Verification |
| Europe | - EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| |
Safety Compliance |
| United States / Canada | UL60950-1 - CSA/CUL 60950-1 |
| Europe | EN60950-1, CE - Low Voltage Directive 73/23/EEE |
0 Articoli
