| |
Product SKUs |
| SYS-1016I-M6F | - SuperServer 1016I-M6F
- (Black)
|
| |
Motherboard |
| Super X8SI6-F |
| |
Processor/Cache |
| CPU | - LGA 1156 Socket
- Intel Xeon X3400 series
- Intel Xeon L3400 series
- Intel Core i3
- Intel Pentium G6950
- Intel Celeron G1101
|
| |
System Memory |
| Memory Capacity | - 6x 240-pin DDR3 DIMM sockets
- Supports up to 48 GB DDR3 ECC registered memory (RDIMM) in 6 DIMM sockets
- Supports up to 16 GB DDR3 ECC unbuffered memory (UDIMM) in 4 DIMM sockets
- 1333 / 1066 / 800 MHz
- Dual Core processors of Core i3 and Pentium: support ECC UDIMM only
- NOTE: Supports 1 Gb and 2 Gb x8 devices only - Intel 3420 / 3400 chipset memory requirements
|
| Note | - All X3400 series and L3426 CPU support RDIMM and UDIMM
- All i3 series, L3406, G6950, and G1101 CPU support UDIMM only
|
| Memory Type | 1333 / 1066 / 800 MHz ECC registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel 3420 chipset |
| SAS | - 6 Gb/s LSI 2008
- RAID 0, 1, 10 support
- (Optional: AOC-SAS-2-RAID5-KEY) RAID 5 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - 2x Intel 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond 83627DHG-P |
| Clock Generator | CK505 |
| |
Expansion Slots |
| PCI-Express | - 1x (x8) PCI-E 2.0 slot via Riser Card
- AOC Compatibility Matrix
|
| |
Input / Output |
| SAS | 8x 2.5" 6 Gb/s SAS |
| Serial ATA | 4 SATA hard drives supported |
| LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header (4 ports)
- Total 8x USB 2.0 Compliant
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-113MTQ-560CB |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 19.98" (508 mm) |
| Packaging | 24" (W) x 8.5" (H) x 30" (L) |
| Weight | - Net Weight: 18.5 lbs (8.4 kg)
- Gross Weight: 29.5 lbs (13.4 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
| |
Drive Bays |
| Hot-Swap | 8x 2.5" Hot-swap SAS / SATA drive bays |
| |
SAS / SATA Backplane |
| 1x SAS / SATA Backplane |
| |
System Cooling |
| Fans | - 4x 40x28 mm high-efficiency fans
- 6x fans maximum
|
| |
Power Supply |
| 560 W AC to DC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 6.5-2.6 A |
| +5 V | 15 A |
| +5 V standby | 2 A |
| +12 V | 46.5 A |
| -12 V | 0.5 A |
| +3.3 V | 15 A |
| Certification | Silver Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
