| |
Product SKUs |
| SuperWorkstation | SYS-5037A-i (Black) |
| |
Motherboard |
| Motherboard | MBD-X9SRA |
| |
Processor/Cache |
| CPU | - Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600/1600 and E5-2600/1600 v2 family?
|
| Note | ? BIOS version 3.0 or above is required |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512 GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC RDIMM
- Up to 64 GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB, 64 GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - 2 SATA3 (6Gbps) and 4 SATA2 (3Gbps)
- RAID 0, 1, 5, 10
|
| Network Controllers | - Intel 82579LM and 82574L, 2x Gigabit LAN ports
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
| TPM | 20-pin Header v1.2 |
| |
Input / Output |
| Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4 SATA 2.0 ports (3 Gb/s)
|
| SCU | 4 SATA 2.0 ports (3 Gb/s) via SCU |
| LAN | 2x RJ45 LAN ports |
| USB | - 4 USB 3.0 (5 Gb/s; 2 rear, 2 via headers)
- 14 USB 2.0 (8x rear, 6x via headers)
- Total 4x USB 3.0 and 14x USB 2.0
|
| Audio | Line-in / Line-out / Microphone ports |
| Serial Port / Header | 2x Fast UART 16550 serial port(one header and one rear port) |
| |
Expansion Slots |
| PCI-Express | - 2 (x16) PCI-E 3.0 slots
- 1x (x4) PCI-E 3.0 in x8 slot
- 1x (x4) PCI-E 2.0 in x8 slot
- 1x PCI 32-bit slot
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | Mid-Tower |
| Model | CSE-732D4-903B |
| |
Dimensions |
| Height | 16.7" (424 mm) |
| Width | 7.6" (193 mm) |
| Depth | 20.68" (525.3 mm) |
| Weight | - Net Weight: 29.5 lbs (13.38 kg)
- Gross Weight: 35.5 lbs (16.10 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports | 2x Front side USB ports (USB 2.0 ready) |
| |
Drive Bays |
| Hard Drive | - 4x 3.5" SATA-3 HDD Bays
- 90° rotatable tool-less hard drive cage
- 4x 2.5" Internal HDD/SSD bays (optional)
- Enterprise SATA HDD only recommended
|
| |
System Cooling |
| Fans | - 1x 12cm rear exhaust fan
- Optimized Cooling Technology at 21 dB Whisper-Quiet Operation
|
| |
Power Supply |
| 900 W AC multi output power supply |
| AC Voltage | 100-240 V, 50-60 Hz, 10-6 A |
| +5V Standby | 3 A |
| +12 V1 | 25 A |
| +12V2 | 25 A |
| +12V3 | 25 A |
| +12 V4 | 25 A |
| +5 V | 25 A |
| +3.3 V | 25 A |
| -12 V | 0.5 A |
| Certification | Gold Level |
| Note: | - ? Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
- ? Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
| FAN | Total of 5 fan headers supporting up to 5 fans |
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 5x fan connectors
- PECI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
