| |
Product SKUs |
| SuperServer | SYS-5037MR-H8TRF (Black) |
| |
Motherboard |
| Motherboard | MBD-X9SRD-F |
| |
Processor/Cache |
| CPU | - Single Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 12 cores and up to 130 W)
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory (per node) |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 128 GB DDR3 ECC registered memory (RDIMM)
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices (per node) |
| Chipset | Intel C602J chipset |
| SATA | - 1x SATA DOM
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Headers | 1x USB header & 1x Type A USB, TPM ready |
| Graphics | Matrox G200eW 16MB DDR2 |
| Super I/O | Nuvoton WPCM450RA0BX |
| |
Network Devices (per node) |
| MicroLP NIC | - Intel i350, 2x Gigabit LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| |
Input / Output (per Node) |
| Serial ATA | 2x SATA 3.0 ports (6 Gb/s) |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| KVM | 1x VGA, 1x COM, and 2x USB 2.0 (with KVM dongle) ports |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
| |
Rear Window (each node) |
| Switch | Power / UID |
| |
Chassis |
| Form Factor | 3U |
| Model | CSE-938H-R1620B |
| |
Dimensions |
| Height | 5.21" (132.5 mm) |
| Width | 17.26" (438.4 mm) |
| Depth | 23.2" (589 mm) |
| Package | 11.65" (H) x 26.26" (W) x 34" (D) |
| Weight | - Net Weight: 62.2 lbs (28.21 kg)
- Gross Weight: 88 lbs (39.92 kg)
|
| Color | Black |
| |
Front Panel |
| Buttons | Power On/Off button |
| LEDs | |
| |
Expansion Slots (per node) |
| PCI-Express | - 1x (x8) PCI-E 3.0 Low-Profile slot, MicroLP Adapter Matrix (Networking options)
- AOC Compatibility Matrix
|
| |
Drive Bays (per node) |
| Hot-Swap | - 2x 3.5" hot-swap SATA-3 (6 Gb/s) HDDs per node; up to 16 HDDs total
- Enterprise SATA HDD only recommended
|
| |
System Cooling |
| Fans | 4x 8cm 11K RPM, 4-pin PWM cooling fans |
| |
Power Supply |
| 1620 W high-efficiency redundant power supply w/ PMBus |
| AC Input | - 1000 W Output @ 100-120 V, 12-10 A, 50-60 Hz
- 1200 W Output @ 120-140 V, 12-10 A, 50-60 Hz
- 1620 W Output @ 180-240 V, 10.5-8 A, 50-60 Hz
|
| DC Output | - 1000 W: +12 V / 84 A; +5 V sb / 4 A
- 1200 W: +12 V / 100 A; +5V sb / 4 A
- 1620 W: +12 V / 150 A; +5 V sb / 4 A
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
| FAN | Cooling zone |
| Temperature | Monitoring for CPU and chassis environment |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
