|
Product SKUs |
SYS-6016T-6RFT+ | SuperServer 6016T-6RFT+ (Black) |
|
Motherboard |
Super X8DTU-6TF+ |
|
Processor/Cache |
CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeon processor X5600/E5600/L5600 Series (Westmere) 40 W - 130 W
- Intel Xeon processor X5500/E5500/L5500 Series (Nehalem-EP) 38 W - 95 W
|
QPI | Up to 6.4 GT/s |
|
System Memory |
Memory Capacity | - 18x 240-pin DIMM sockets
- Supports up to 288 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
Memory Voltage | 1.5 V / 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
Note: | This board does not support LRDIMM memory. |
|
On-Board Devices |
Chipset | - Intel 5520 (Tylersburg) chipset
- ICH10R
|
SAS | - LSI 6 Gb/s SAS 2108 w/ Hardware RAID support
- RAID 0, 1, 5, 6, 10 support
- BBU (Battery Backup Unit) Extension Kit
|
SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
Network Controllers | - Intel 82599EB 10 Gigabit Ethernet Controller with 2 SFP+ interfaces
- Intel 82576 Dual-Port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Matrox G200eW |
Super I/O | Winbond 83827HF chip |
|
Input / Output |
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
LAN | - 2x RJ45 LAN ports
- 2x SFP+ LAN port
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 5x USB 2.0 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header (Option)
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-819TQ-R700UB |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 27.75" (705 mm) |
Gross Weight | 43 lbs (19.45 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off Button
- System Reset Button
- UID Button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Universal Information (UID) LED
|
|
Expansion Slots |
PCI-Expansion | - 2x (x8) PCI-E 2.0 slots (Left Slot)
- 1x (x4) PCI-E 2.0 (in x8 slot Low-Profile - 5.5" depth) (Right Slot)
- UIO AoC Compatibility Matrix
|
|
Drive Bays |
Hot-Swap | 4x 3.5" SAS / SATA Hot-Swap drive trays |
|
Peripheral Drives |
DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM drive |
|
Backplane |
1U SAS/SATA Backplane w/ SES2 Enclosure Management |
|
System Cooling |
Fans | 5x Cooling Fans |
Shroud | 1x Air Shroud |
|
Power Supply |
700 W/750 W Redundant AC-DC high-efficiency power supply with PMBus and I²C |
AC Input | - 700 W: 100-140 V, 50-60 Hz, 8.5-6 A
- 750 W: 180-240 V, 60-50 Hz, 5-3.8 A
|
DC Output +5 V standby | 3 A |
DC Output +12 V | - 700 W: 58 A @ 100-140 V
- 750 W: 62 A @ 180-240 V
|
With Power Distributor | - +5 V: 25 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
Certification | Gold Certified |
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|