|
Product SKUs |
SYS-7046T-3R | SuperServer 7046T-3R (Black) |
|
Motherboard |
Super X8DT3 |
|
Processor/Cache |
CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
|
QPI | Up to 6.4 GT/s |
|
System Memory |
Memory Capacity | - 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
Memory Voltage | 1.5 V / 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
Graphics | Matrox G200eW |
Super I/O | Winbond 83827HF chip |
|
Expansion Slots |
PCI-Express | - 3 (x8) PCI-E 2.0 (1 in x16 slot)
- 1x (x4) PCI-E slot
|
PCI | 2x 33MHz PCI slots |
|
Input / Output |
SAS | 8x SAS / SATA ports |
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | - 4x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8x USB 2.0 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header (Option)
|
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Chassis |
Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
Model | SC745TQ-R800B |
|
Dimensions |
Height | 17.2" (437mm) |
Width | 7.0" (178 mm) |
Depth | 25.5" (648 mm) |
Gross Weight | 63 lbs (28.6kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power Fail LED
|
Ports | 2x USB Ports |
|
Drive Bays |
Hot-Swap | - 8x Hot-swap Drive Bays
- Supports up to 8x SAS Hard Drives
|
Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 3.5" Bay
|
|
SAS / SATA Backplane |
SAS / SATA Backplane w/ Enclosure Management |
|
System Cooling |
Fans | - 3x 5000 RPM Hot-Swap Cooling Fans
- 2x 5000 RPM Hot-Swap Rear Exhaust Fan
|
Shroud | 1x Air Shroud |
|
Power Supply and Distributor |
800 W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
AC Voltage | 100 - 240 V, 50-60 Hz, 10-4 A |
+5 V standby | 4 A |
+12 V | 66 A |
With Power Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|