| |
Product SKUs |
| SYS-8046B-TRF | SuperServer 8046B-TRF (Black) |
| |
Motherboard |
| Super X8QBE-F |
| |
Processor/Cache |
| CPU | - Quad 1567-pin LGA Sockets
- Supports up to four Intel Xeon 64-bit processor(s) of the same type below:
- Intel Xeon processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel Xeon processors E7-4800 family (10-core, codename Westmere-EX)
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 32x 240-pin DIMM sockets
- Supports up to 1024 GB DDR3 ECC reg. memory at 1066/978/800MHz speed
- Memory Mirroring supported
|
| Memory Type | 1333*/1066/800MHz ECC registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 32 GB**
|
| Memory Voltage | 1.5 V, 1.35 V** |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 7500 (Boxboro-EX) chipset
- ICH10R
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5 support (Windows)
- RAID 0, 1 support (Linux)
|
| Network Controllers | - Intel 82576 Dual-Port Gigabit Ethernet controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83527HB chip |
| |
Input / Output |
| LAN | 3x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers (3 ports)
- Total 5x USB 2.0 Compliant
|
| VGA | 1x VGA Port |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit(MCP-290-00059-0B)
|
| Model | CSE-748TQ-R1400B |
| |
Dimensions |
| Height | 17.8" (452mm) |
| Width | 7.0" (178 mm) |
| Depth | 28.4" (721mm) |
| Weight |
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | - 5x 3.5" Hard drive bays
- Additional 5x 3.5" Hard Drives available with optional M35 Mobile Rack
|
| Peripheral Bay(s) | 3x 5.25" Peripheral Drive Bays |
| |
Expansion Slots |
| PCI-Express | - Auto-switch for 2x (x16) PCI-E 2.0 or
- 1x (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
- 4x (x8) PCI-E 2.0 slots
|
| |
Backplane |
- SAS/SATA HDD Backplane
- (SAS support requires optional SAS controller)
|
| |
System Cooling |
| Fans | - 3x 80mm RPM Hot-Swap Cooling Fans
- 3x 80mm RPM Hot-Swap Rear Exhaust Fan
|
| Shrouds | 1x Air Shroud |
| |
Power Supply |
| Redundant 1400 W high-efficiency power supply with PMBus |
| AC Input | - 1200 W: 100 - 140 V, 50 - 60 Hz, 10.5 - 14.7 A
- 1400 W: 180 - 240 V, 50 - 60 Hz, 7.2 - 9.5 A
|
| DC Output +5 V standby | 6 A |
| DC Output +12 V | - 100 A @ 100-140 V
- 117 A @ 180-240 V
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 10x 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
