| |
Product SKUs |
| SYS-7046A-HR+F | SuperServer 7046A-HR+F (Black) |
| |
Motherboard |
| Super X8DAH+-F |
| |
Processor/Cache |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 18x 240-pin DIMM sockets
- Supports up to 288 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 48 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
| Memory Voltage | 1.5 V / 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| Note: | This board does not support LRDIMM memory. |
| |
On-Board Devices |
| Chipset | - Intel 5520 (Tylersburg) chipset
- ICH10R +2x IOH-36D
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel 82576 Dual-Port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Audio | Realtek ALC883 7.1 HD audio |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| |
Expansion Slots |
| PCI-Express | - 2x (x16) PCI-E 2.0 slots
- 4x (x8) PCI-E 2.0 slots (1 in x16 slot)
- 1x (x4) PCI-E slot
|
| |
Input / Output |
| Serial ATA | - 6 Serial ATA ports
- 6 SATA hard drives supported
|
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | - 2 RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 6 USB rear ports
- 2 USB on-board
- 2 USB internal headers (4 ports)
- Total 12x USB 2.0 Compliant
|
| Audio | Realtek ALC883 7.1 HD audio |
| VGA | 1 VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header (Option)
|
| IEEE 1394a | 2 IEEE 1394a ports (1x header) |
| |
Chassis |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
| Model | CSE-745TQ-R1400B |
| |
Dimensions |
| Height | 17.2" (437mm) |
| Width | 7.0" (178 mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 63 lbs (28.6kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | - 8x Hot-swap Drive Bays
- Supports up to 6x SATA Hard Drives
|
| Peripheral Bay(s) | 3x 5.25" Peripheral Drive Bays |
| |
SAS / SATA Backplane |
| SAS / SATA Backplane w/ Enclosure Management |
| |
System Cooling |
| Fans | - 3x 5000 RPM Hot-Swap Cooling Fans
- 2x 5000 RPM Hot-Swap Rear Exhaust Fan
|
| |
Power Supply |
| 1400 W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input | - 1100 W Output @ 100-140 V, 13.5-9.5 A, 50-60 Hz
- 1400 W Output @ 180-240 V, 9.5-7.0 A, 50-60 Hz
|
| DC Output | - 1100 W: +12 V / 92 A; +5V sb / 4 A
- 1400 W: +12 V / 116 A; +5 V sb / 4 A
|
| With Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
