| |
Product SKUs |
| SuperWorkstation | SYS-7037A-i (Black) |
| |
Motherboard |
| Super X9DAi |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
|
| Note | ? BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
| Super I/O | Nuvoton W83627 |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 8x SATA 2.0 ports (3 Gb/s)
|
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| USB | - 4x USB 3.0 ports
- (2x front + 2x rear)
- 7x USB 2.0 ports
- (4x rear + 2x via header + 1x Type A)
|
| Audio | Line-in / Line-out / Microphone ports |
| Keyboard/Mouse | PS/2 Keyboard/Mouse port |
| Serial Port / Header | 1x Fast UART 16550 ports |
| IEEE 1394a | 2x Headers |
| |
Expansion Slots |
| PCI-Express | - 3 (x16) PCI-E 3.0 slots
- 2 (x8) PCI-E 3.0 slots
- 1x (x4) PCI-E 3.0 slot
|
| |
System BIOS |
| BIOS Type | 64 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Chassis |
| Form Factor | Mid-Tower |
| Model | CSE-732D4F-903B |
| |
Dimensions |
| Height | 16.7" (424mm) |
| Width | 7.6" (193mm) |
| Depth | 20.68" (525.3mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | Power On/Off button |
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports | - 2x front USB 3.0 Ports
- 2x front USB 2.0 Ports
- 2x front 1394 Ports
- 2x front HD/AC97 Audio Ports
|
| |
Drive Bays |
| Internal | - 4x 3.5" SATA HDD Bays(90° rotatable drive cage)
- Enterprise SATA HDD only recommended
|
| Peripheral Bay | - 2x 5.25" peripheral drive bays
- 1x 3.5" peripheral drive bay
|
| |
System Cooling |
| Fans | - 1x 12 cm (1850 rpm) rear exhaust fan
- 1x 12cm (1850rpm) front cooling fan
- Optimized cooling technology for Whisper-Quiet Operation
|
| Heatsink | Optional 2x active CPU heatsink (SNK-P0050AP4) |
| |
Power Supply |
| 900 W AC multi output power supply |
| AC Voltage | 100-240 V, 50-60 Hz, 10-6 A |
| +5V Standby | 3 A |
| +12 V1 | 25 A |
| +12V2 | 25 A |
| +12V3 | 25 A |
| +12 V4 | 25 A |
| +5 V | 25 A |
| +3.3 V | 25 A |
| -12 V | 0.5 A |
| Certification | Gold Level |
| Note: | - ? Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
- ? Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - Total of three fan headers supporting up to 8 fans
- Three 4-pin fan headers
- 3x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
