| |
Product SKUs |
| SuperWorkstation | SYS-7038A-I (Black) |
| |
Motherboard |
| Super X10DAi |
| |
Processor/Cache |
| CPU | - IntelŽ XeonŽ processor E5-2600 v4/
- v3 family
- (up to 160W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM:
- 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | IntelŽ C612 chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| Network Controllers | - IntelŽ i210 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Audio | RealTek ALC888 7.1 High Definition Audio with S/PDIF header |
| Super I/O | Nuvoton W83627 |
| |
Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| USB | - 6x USB 3.0 ports (4 rear + 2 via header)
- 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
|
| Audio | 7.1 HD Audio with optical S/PDIF |
| DOM | 2x DOM (Disk on Module) power connectors |
| TPM | 1x TPM 1.2 20-pin Header |
| |
Expansion Slots |
| PCI-Express | - 3x PCI-E 3.0 x16 slots
- 2x PCI-E 3.0 x8 slots
- 1x PCI-E 2.0 x4 (in x8) slot supports Thunderbolt 2.0 AIC
|
| |
System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Chassis |
| Form Factor | Mid-Tower |
| Model | CSE-732D4-903B |
| |
Dimensions and Weight |
| Height | 16.7" (424mm) |
| Width | 7.6" (193mm) |
| Depth | 20.68" (525.3mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | Power On/Off button |
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports | - 2x front USB 3.0 Ports
- 2x front USB 2.0 Ports
- 2x front HD/AC97 Audio Ports
|
| |
Drive Bays |
| Internal | - 4x 3.5" SATA HDD Bays(90° rotatable drive cage)
- Enterprise SATA HDD only recommended
|
| Peripheral Bay | - 2x 5.25" standard drive bays
- 1x 3.5" internal fixed drive bay
|
| |
System Cooling |
| Fans | - 2x 12cm (1859rpm) cooling fans
- Optimized cooling technology for Whisper-Quiet Operation
|
| Heatsink | Optional 2x active CPU heatsink (SNK-P0050AP4) |
| |
Power Supply |
| 900 W AC multi output power supply |
| AC Voltage | 100-240 V, 50-60 Hz, 10-6 A |
| +5V Standby | 3 A |
| +12 V1 | 25 A |
| +12V2 | 25 A |
| +12V3 | 25 A |
| +12 V4 | 25 A |
| +5 V | 25 A |
| +3.3 V | 25 A |
| -12 V | 0.5 A |
| Certification | Gold Level |
| Note: | - Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
- Max. continuous combined load on +12 V1, +12 V2, +12 V3 and +12 V4 output shall not exceed 860 W.
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
