| |
Product SKUs |
| MBD-X10SRH-CLN4F -B | X10SRH-CLN4F (Bulk Pack) |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6", (30.5cm x 24.4cm) |
| |
Processor |
| CPU | - Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **)
- Single Socket R3 (LGA 2011)
|
| Core / Cache | Up to 18 Cores / Up to 45MB Cache |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| |
System Memory |
| Memory Capacity | - 8x 288-pin DDR4 DIMM sockets
- Up to 512GB DDR4 ECC LRDIMM
- Up to 256GB DDR4 ECC RDIMM
|
| Memory Type | 2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 284-pin gold-plated DIMMs |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C612 Express chipset |
| SAS | - SAS3 (12Gbps) via LSI 3008
- SW RAID 0, 1, 10
|
| SATA | - SATA3 (6Gbps) via C612 controller
- RAID 0, 1, 5, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel® i350-AM4 Quad Port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| SATA | 10x SATA3 (6Gbps) ports |
| LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 4x USB 3.0 ports (2 rear + 1 via header + 1 Type A)
- 8x USB 2.0 ports (2 rear + 6 via header)
|
| Video | 1x VGA port |
| Serial Port / Header | 2x fast UART 16550 serial, 2 COM ports (1 rear, 1 header) |
| SuperDOM | 2x SuperDOM (Disk on Module) ports with built-in power |
| TPM | 1x TPM 1.2 20-pin Header |
| |
OS compatibility |
| Please reference the OS Compatibility Chart for details |
| |
Chassis ( Optimized for X10SRH-CLN4F ) |
| 1U Chassis | - CSE-813MFTQ-441CB
- CSE-813MFTQ-R400CB
|
| 2U Chassis | - CSE-216BAC-R920LPB
- CSE-823TQ-653LPB
- CSE-825TQ-R600LPB
|
| 3U Chassis | - CSE-833T-653B
- CSE-836TQ-R500B
|
| Mid-Tower | CSE-732i-500B |
| Tower / 4 U Rackmount | - CSE-743T-665B
- CSE-842TQ-665B
- CSE-842TQ-865B
|
| Important Chassis Notes | To support motherboards based on Intel® Xeon® processor 5500/3500 series, Revision K or later chassis is recommended for most models. Please talk to your sales representative for details. |
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x4 (in x8) slot
- 1x PCI-E 3.0 x8 (in x16) slot
- 2x PCI-E 3.0 x8 slots
- 1x PCI-E 2.0 x2 (in x4) slot
- 1x PCI-E 2.0 x4 (in x8) slot
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
Management |
| Software | - IPMI 2.0 with KVM support
- SuperDoctor® 5
- Watch Dog
|
| Power Configurations | - ACPI Power Management
- Keyboard wakeup from soft-off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | - Total of 6 fan headers supporting up to 6 fans
- 6 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill support
- RoHS, Halogen Free
|
0 Articoli
