| |
Product SKUs |
| MBD-X7DBP-8-B | X7DBP-8 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 16.24" Length x 11.23" Width (41.25cm x 28.52cm) |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667/533 MHz FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
| Memory Type | 667/533 MHz FB-DIMM (Fully Buffered DIMM) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SATA | - ESB2 SATA controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10 support
|
| RAID | - Support for Zero-Channel RAID
- RAID 0, 1, 5, 10
- Optional: (card NOT included)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIM1U-3B(+) and AOC-SIM1U-3D)
|
| Network Controllers | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK410B chip |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB internal headers, 1 dual, 1 single
- USB 2.0 compliant / 1.1 compatible
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2x Fast UART 16550 serial ports |
| |
Chassis ( Optimized for X7DBP-8 ) |
| 1U Chassis | - CSE-816S-R700
- CSE-816S-700
|
| Important Chassis Notes | To ensure system stability, a 500W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| |
Expansion Slots |
| Left universal slot | - 1x (x8) PCI-e slot OR
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| Right Universal Slot | - 1x (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X (3.3V) slot
|
| IPMI | 1x SIM 1U Slot (IPMI 2.0)(Supermicro Intelligent Management) |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5 - with Virtual Media 8
- Optional KVM over LAN & 3rd LAN Port
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal/External modem remote ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +3.3 V, +5 V, ±12 V, +5 V Standby, VBAT
- CPU core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
|
| FAN | - Total of ten proprietary fan headers for up to ten fans
- Ten fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED | CPU / System Overheat LED |
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
0 Articoli
