| |
Product SKUs |
| MBD-X8STi-LN4
-O | - X8STi-LN4
- (Standard Retail Pack)
|
| MBD-X8STi-LN4
-B | |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6" (30.5cm x 24.4cm) |
| |
Processor/Cache |
| CPU | - LGA 1366 Socket
- Intel® Core? i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
- Intel® Core? i7 series
- Intel Xeon 5600/5500 series
- Intel Xeon 3600/3500 series
|
| System Bus | QPI (up to 6.4 GT/s) |
| |
System Memory |
| Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / non-ECC unbuffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
| Memory Type | 1333 / 1066 / 800MHz unbuffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel X58 Express chipset
- ICH10R
|
| SATA | - Intel ICH10R SATA (3.0 Gb/s) controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| VGA | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| |
Input / Output |
| Serial ATA | - 6 SATA ports
- 6 SATA hard drives supported
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 4x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header(4 ports)
- Total 8x USB 2.0 Compliant
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
| |
I/O Panel |
| Please see this board's I/O Panel |
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Chassis ( Optimized for X8STi-LN4
) |
| 1U Chassis | - CSE-512-200B
- CSE-512C-260
- CSE-512F-260
- CSE-512L-260B
- CSE-811i-260
- CSE-811i-280
- CSE-811i-300
- CSE-811T-260
- CSE-811T-300
- CSE-811TQ-280
- CSE-813MT-300C
- CSE-813MTQ-280C
|
| Tower / 4 U Rackmount | CSE-747TQ-R1400B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Optimized Chassis Note: | Additional parts may be required, please check with your sales rep |
| |
Expansion Slots |
| PCI-Express | - 1 (x16) PCI-e 2.0 slot
- 1x (x8) PCI-e slot
|
| PCI | 1x 32-bit PCI slot |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
| FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
