| |
Product SKUs |
| AS-4041M-32R+B | A+ Server 4041M-32R+B (Black) |
| |
Motherboard |
| Super H8QM3-2 |
| |
Processor/Chipset |
| CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors
- HT3.0 Link support
|
| Chipset | |
| |
System Memory |
| Memory Capacity | - Thirty-two 240-pin DIMM sockets
- Supports up to 256 GB DDR2 800/667/533/400 MHz memory *
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SAS | - 8-Port LSI 1068E SAS Controller *
- SAS RAID 0, 1, 10, JBOD Support
|
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI | - Intelligent Platform Management Interface v.2.0, Low Profile
- (Optional: AOC-SIMLC R 3.00)
- (Optional: AOC-SIM1U+ R 3.00)
- RMM (Remote Management Module)
- (Card not included)
- For dedicated LAN, cable CBL-0177L must be used (cable sold separately)
- Note: Dedicated LAN connection is required for KVM-over-LAN function.
|
| Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Super I/O | Winbond 83627HF |
| VGA | ATI ES1000 Graphics Controller |
| |
Input / Output |
| SAS | 8x SAS ports |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant
- 2 Rear Ports
- 2 Internal Headers
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
|
| VGA | 1x VGA port |
| |
Chassis |
| Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit (MCP-290-00001-00)
|
| Model | SC748TQ-R1200 |
| |
Dimensions |
| Height | 7.0" (178 mm) |
| Width | 17.8" (452mm) |
| Depth | 29.4" (746mm) |
| Gross Weight | 87 lbs (39.5kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | 5x 3.5" Hot-swap SAS/SATA Drive Trays |
| Peripheral Bay(s) | 3x 5.25" Peripheral Drive Bays |
| |
Expansion Slots |
| PCI-Express | - 2 x16 PCI-e Slot
- 1x (x8) PCI-e Slot
- 1 x4 PCI-e (in x8 Slot)
|
| PCI-X | 1 64-bit 133/100MHz PCI-X (3.3V) slots |
| |
SAS / SATA Backplane |
| SAS / SATA Hard Drive Backplane |
| |
System Cooling |
| Fans | - 3x 5000 RPM Hot-Swap Cooling Fans
- 3x 5000 RPM Hot-Swap Rear Exhaust Fan
|
| Shrouds | 1x Air Shroud |
| |
Power Supply |
| 1200 W (1 + 1) Redundant high-efficiency power supply w/ PFC |
| +5 V standby | 4 A |
| +12 V | 74 A |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PC Temperature Sensing Logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
System BIOS |
| BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
0 Artikel
