| |
Product SKUs |
| AS-1021M-T2+V | A+ Server 1021M-T2+V (Silver) |
| AS-1021M-T2+B | A+ Server 1021M-T2+B (Black) |
| |
Motherboard |
| Super H8DME-2 |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core AMD Opteron™ 2000 Series (Socket F) processors
- HT3.0 Link support
|
| Chipset | - nVidia MCP55 Pro
- NEC uPD720400
|
| |
System Memory |
| Memory Capacity | - 16x 240-pin DIMM sockets
- Support up to 128GB DDR2
- 800/667/533/400 SDRAM *
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory Type | DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI | - Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-SIMLC R 3.00)(Optional: AOC-SIM1U+)
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| VGA | ATI ES1000 Graphics Controller |
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - FUCI
- Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 4 Internal Headers
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC815TQ-560CB/V |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 25.6" (650mm) |
| Gross Weight | 38 lbs (17.2 kg) |
| Available Colors | Silver, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports | - 2x USB & DB9 COM port tray
- (optional - in place of floppy drive)
|
| |
Expansion Slots |
| PCI-Express Slot | 1 PCI-express x8 Slot |
| |
Drive Bays |
| Hot-Swap | 4 x 3.5" Hot-swap SATA drive bays |
| |
SATA Backplane |
| 1U SATA / SAS Backplane w/ AMI 9071 chip |
| |
System Cooling |
| Fans | 4x Cooling Fans |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| 560 W AC power supply with PFC (24-pin) |
| AC Voltage | 100-240 V, 50-60 Hz, 8.5-4 A |
| +5 V | 25 A |
| +5 V standby | 3 A |
| +12 V | 43.6 A |
| -12 V | 0.6 A |
| +3.3 V | 21 A |
| Certification | Certified |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN | - Total up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
