|
Product SKUs |
AS-2022G-URF | A+ Server 2022G-URF (Black) |
|
Motherboard |
Super H8DGU-F |
|
Processor/Chipset |
CPU | - Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
Chipset | AMD chipset SR5670 / SP5100 |
Note | Supports 6000 processors with Max ACP 80W (TDP 115W) |
|
System Memory |
Memory Capacity | - 16 DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type | DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200 16MB DDR2 |
Super I/O | Winbond 83527 chip |
|
Expansion Slots |
PCI-Express | 2U Left Side: 1 UIO / 3 Ex8 (Gen 2.0) |
|
Input / Output |
SATA | 6x SATA2.0 (3Gb/s) Ports |
LAN | 2x RJ45 ports and 1x RJ45 Dedicated LAN supports IPMI |
USB | - 7x USB 2.0 ports
- 2x Rear, 4x header, 1x Type A
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
Others | 1 UID |
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
Chassis |
Form Factor | 2U Rackmount |
Model | SC825TQ-R720UB |
|
Dimensions |
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 25.5" (648 mm) |
Gross Weight | 55 lbs (29.9 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off Button
- System Reset Button
- UID Button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
Ports | 2x USB & DB9 COM port tray |
|
Drive Bays |
Hot-Swap | 8x 3.5" SAS / SATA Hot-swap drive bays (SAS or enterprise SATA HDD only recommended) |
|
Peripheral Drives |
DVD-ROM | Slim DVD-ROM drive |
|
SAS Backplane |
1x 2U SAS backplane w/ Enclosure Management |
|
System Cooling |
Fans | 3x 80 x 38 mm 4-pin PWM Fans |
|
Power Supply with Power Distributor |
720W (1+1) Redundant high-efficiency power supply with PMBus |
AC Input | 100-240 V, 50-60 Hz, 4-9 A |
DC Output | - 3 A @ +5V standby
- 59 A @ +12V
|
With Power Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
Certification | Gold Certified |
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
FAN | - Total up to 8-fan status tachometer monitoring
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
- UID/Remote LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|