|
Product SKUs |
MBD-C2SBM-Q-O | C2SBM-Q (Standard Retail Pack) |
MBD-C2SBM-Q-B | C2SBM-Q (Bulk Pack) |
|
Physical Stats |
Form Factor | Micro ATX |
Dimensions | 9.6" x 9.6 ", (24.4cm x 24.4cm) |
|
Processor/Cache |
CPU | - Single LGA775 Socket
- Supports Intel® Core?2 Extreme QX9000/QX6000 series
- Supports Intel® Core?2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core?2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
|
System Bus | 1333 / 1066 / 800 MHz system bus |
|
System Memory |
Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
|
Memory Type | DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
Chipset | |
Serial ATA | - Intel® ICH9DO SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
Network Controllers | - 1 x Intel® 82566DM Single Port Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
|
Audio | RealTek ALC883 High Definition 7.1 Channel Audio |
Video | On board graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
|
Input / Output |
Serial ATA | Four Serial ATA ports (3 Gb/s performance) |
IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
LAN | 1x RJ45 LAN port |
USB | - 11x USB 2.0/1.1 compliant (6x ports + 2x headers + 1 on-board connectors)
- 6 rear ports, 5 on-board
|
Audio | Line-in / Line-out / Microphone ports |
VGA | On board VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 2x Fast UART 16550 serial port
- 2x Serial Header
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Chassis ( Optimized for C2SBM-Q ) |
Mid-Tower | - CSE-733E-465B
- CSE-733i-465B
- CSE-733i-645
- CSE-733T-465B
- CSE-733T-645
- CSE-733TQ-465B
|
Important Note | To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
|
Expansion Slots |
PCI-Express | - 1x (x16) PCI-e slot
- 1 (x4) (using x8) PCI-e slot
|
PCI | 2x 32-bit 33MHz PCI (5V) slots |
|
System BIOS |
BIOS Type | 16Mb SPI Flash EEPROM with Phoenix BIOS® |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Management |
Software | - SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
- Suspend to RAM (STR)
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
|
FAN | - Total of three 4-pin fan headers
- 3 x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- Standby alert LED
|
Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- TPM 1.2
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 0° to 55°C
- Non-operating Temperature: -40° to 85°C
- Operating Relative Humidity: 15% to 95% (non-condensing)
- Non-operating Relative Humidity: 15 to 90% (non-condensing)
|