|
Product SKUs |
MBD-H8DGU-LN4F+ | H8DGU-LN4F+ (Bulk Pack) |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 12.8" x 16.5" (32.51cm x 41.91cm) |
|
Processor/Chipset |
CPU | - Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
Chipset | AMD chipset SR5690 / SP5100 |
|
System Memory |
Memory Capacity | - 24 DIMM sockets
- Supports up to 768GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 24 DIMMs
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers | - 2x Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA | Matrox G200eW 16MB DDR2 |
Super I/O | Winbond 83527HG chip |
|
Input / Output |
SATA | 6x SATA (3Gb/s) Ports |
LAN | - 4 RJ45 LAN ports
- 1x RJ45 Dedicated LAN supports IPMI
|
USB | - 7x USB 2.0 ports
- 2x Rear, 2x header(4 ports), 1x Type A
|
VGA | 2x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
Others | 1UID, 1 SATA DOM power connector, TPM header |
|
Expansion Slots |
PCI-Express (Gen 2.0) | - 1U Left Slot:
- 1 PCI-E 2.0 x16 and UIO or 2 PCI-E 2.0 x8 or
- 1 PCI-E 2.0 x16 or
- 1 PCI-E 2.0 x8 and UIO
- 2U Left Slot:
- 2 PCI-E 2.0 x8 and UIO or
- 3 PCI-E 2.0 x8 or 1 PCI-E 2.0 x16 and UIO
- 2U Right Slot:
- 3 PCI-E 2.0 (x4 + x1 + x1) (via RSC-R2UU-2E2E4R Riser Card)
- (See Optional Part List)
|
|
Chassis ( Optimized for H8DGU-LN4F+ ) |
1U Chassis | - CSE-119TQ-R700UB Requires air shroud MCP-310-19003-0N*
- CSE-119TQ-R700UB Requires air shroud MCP-310-19003-0N*
|
2U Chassis | CSE-829TQ-R920UB |
Note | * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list. |
|
Server(s) ( with H8DGU-LN4F+ ) |
Model(s) | - AS -1122G-URF4+
- AS -2022G-URF4+
|
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with AMI® BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
Power Configurations | - ACPI Power Management
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
FAN | - Total up to 8-fan status tachometer monitoring
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
- UID/Remote LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature:
- 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
- -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
- 8% to 90% (non-condensing)
- Non-operating Relative Humidity:
- 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |