| |
Product SKUs |
| MBD-X9SRL-F -B | X9SRL-F (Bulk Pack) |
| |
Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6", (30.5cm x 24.4cm) |
| |
Processor/Cache |
| CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600/1600 and E5-2600/1600 v2 family?
- (up to 12 cores and up to 130 W)
|
| Note | ? BIOS version 3.0 or above is required |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512 GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC RDIMM
- Up to 64 GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB, 64 GB LRDIMM |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors
- (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA3 (6Gb/s) and SATA2 (3Gb/s)
- RAID 0, 1, 5, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450RA0BX
|
| Network Controllers | - Intel 82574L Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Video | Matrox G200eW 16MB DDR2 graphics |
| |
Input / Output |
| SATA | - 2 SATA 3.0 ports (6Gb/s)
- 4 SATA 2.0 ports (3Gb/s)
|
| SCU | 4 SATA ports (3Gb/s) via SCU |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 9 USB 2.0 ports total (2 rear + 6 via header + 1 Type A) |
| Video | 1x VGA port |
| Keyboard/Mouse | 2 PS/2 Keyboard/Mouse ports |
| Serial Port / Header | 1 serial port, 1 by headers |
| DOM | 1x DOM (Disk on Module) power connector |
| TPM | 1 TPM 1.2 20-pin Header |
| |
OS compatibility |
| Please reference the OS Compatibility Chart for details |
| |
Chassis ( Optimized for X9SRL-F ) |
| 2U Chassis | - CSE-823TQ-650B
- CSE-823TQ-653LPB
- CSE-826E16-R500LPB
- CSE-826TQ-R500LPB
|
| 3U Chassis | - CSE-836E16-R500B
- CSE-836TQ-R500B
|
| Tower / 4 U Rackmount | CSE-842TQ-665B |
| Important Chassis Notes | To support motherboards based on Intel® Xeon® processor 5500/3500 series, Revision K or later chassis is recommended for most models. Please talk to your sales representative for details. |
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x8 (in x16) slots
- 2x PCI-E 3.0 x8 slots
- 2x PCI-E 3.0 x4 (in x8) slots
- 1x PCI-E 2.0 x4 (in x8) slot
|
| |
System BIOS |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / APM Power Management
- Keyboard wakeup from soft-off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | - Total of 5 fan headers supporting up to 5 fans
- 5 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill support
- RoHS, Halogen Free
|
0 Artikel
