|
Product SKUs |
SYS-2028R-C1R | SuperServer 2028R-C1R (Black) |
|
Motherboard |
Super X10DRH-C |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | ** Please contact your Supermicro sales representative for additional details. |
|
System Memory |
Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
Memory Voltage | 1.2 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel® C612 Express chipset |
SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
SAS | LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel i350 Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Graphics | ASPEED AST2400 BMC |
|
Input / Output |
SATA | 8x SATA3 (6Gbps) ports |
SAS | 8x SAS-3 (12 Gb/s) ports |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB 3.0 ports (2 rear)
- 4x USB 2.0 ports (2 rear, 2 front)
- 1x USB Type A
|
Video | 1x VGA Connector |
Serial Port / Header | - 2x Fast UART 16550 serial
- 2x COM Ports (1 rear, 1 front)
|
|
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
|
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-213AC-R920LPB |
|
Dimensions and Weight |
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 24.8" (630mm) |
Package | 10.5" (H) x 26.5" (W) x 38" (D) |
Weight | - Net Weight: 38 lbs (17.4 kg)
- Gross Weight: 63 lbs (28.8 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
|
Expansion Slots |
PCI-Express | - 1x PCI-E 3.0 x16
- 6x PCI-E 3.0 x8 (Low-profile AOC)
|
|
Drive Bays |
Hot-Swap | 8x 2.5" SAS3 and 8x 2.5" SATA3 Hot-swap drive bays |
Peripheral | Optional DVD-ROM drive supports 1x slim or 1x 5.25" DVD drive |
|
System Cooling |
Fans | 3x 8cm heavy duty fans with optimal fan speed control |
|
Power Supply with Power Distributor |
920 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I²C |
AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
Certification | Platinum Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
FAN | - Total of five 4-pin PWM fans
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
Other Features | SDDC Support |
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|