|
Product SKUs |
SYS-6016T-MTHF | SuperServer 6016T-MTHF (Black) |
|
Motherboard |
Super X8DTL-IF |
|
Processor/Cache |
CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeon processor X5600/E5600/L5600 Series (Westmere) 40 W - 95 W
- Intel Xeon processor X5500/E5500/L5500 Series (Nehalem-EP) 38 W - 95 W
|
QPI | Up to 6.4 GT/s |
|
System Memory |
Memory Capacity | - 6x 240-pin DIMM sockets
- Supports up to 96 GB** 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB**
- , 16 GB**
|
Memory Voltage | 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - 2x Intel 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Matrox G200eW |
Super I/O | Winbond 83827HF chip |
|
Input / Output |
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 6x USB 2.0 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header (Option)
|
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-813MTQ-600CB |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 19.8" (503 mm) |
Gross Weight | 31 lbs (14.1 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports | - 2x Front USB Ports
- 1x Serial COM Port
|
optional Front Bezel | Please refer to the Front Bezel Compatibility Table |
|
Expansion Slots |
PCI-Express | 1x PCI-E(x8) in x16 slot |
|
Drive Bays |
Hot-Swap | 4x 3.5" Hot-swap SATA drive bays |
|
Peripheral Drives |
DVD-ROM | Slim DVD-ROM drive (optional) |
|
SATA Backplane |
1x SATA Backplane |
|
System Cooling |
Fans | 4x 4 cm heavy duty RPM fans |
|
Power Supply |
600 W AC multi output power supply w/ PFC |
AC Voltage | 100-240 V, 50-60 Hz, 7.5-3.1 A |
+5 V | 20 A |
+5 V standby | 3 A |
+12 V | 49 A |
+3.3 V | 16 A |
Certification | Gold Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, +12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator
|
FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 6x fan connectors
- PECI
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|