|
Product SKUs |
SYS-6036ST-6LR | SuperServer 6036ST-6LR (Black) |
|
Motherboard |
2x Super X8DTS-F |
|
Processor/Cache |
CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
|
QPI | Up to 6.4 GT/s |
|
System Memory |
Memory Capacity | - 6x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | - 1GB, 2GB, 4GB
- , 8 GB
- , 16 GB
|
Memory Voltage | 1.5 V / 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
SAS/SATA* | LSI 6 Gb/s SAS 2008 |
SAS-2 Expander | - Scalability through cascading
- 6Gb SAS2/SATA2 HDD support
- Inband SES-2 Enclosure Management
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel 82599EB controller for Dual 10 Gigabit Ethernet interconnection between nodes
- Intel 82576 Dual-Port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
Graphics | Matrox G200eW 16 MB DDR2 |
Super I/O | Winbond 83827HF chip |
|
Expansion Slots |
PCI-Express | - 1x (x8) PCI-E 2.0 slot (w/ riser)
- 2 (x4) PCI-E 2.0 slots (w/ Riser)
|
|
Input / Output |
SAS | One 4x 6 Gb/s JBOD expansion port per Node |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports (via KVM cable)
- 1x USB on-board (TypeA)
|
VGA | 1x VGA Port (via KVM cable) |
Serial Port / Header | 1x console port (via KVM cable) |
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
Chassis |
Form Factor | 3U Rackmount |
Model | CSE-937ETS-R1200NDBP |
|
Dimensions |
Height | 5.2" (132 mm) |
Width | 17.2" (437mm) |
Depth | 25.5" (648 mm) |
Gross Weight | 75 lbs (34.02 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
- Alarm Mute Switch
|
LEDs | - Power LED
- Hard Drive Activity LED
- 2x Network Activity LED
- System Overheat LED
- Power Fail LED
|
|
Drive Bays |
Hot-Swap | - 16x Hot-swap 3.5" Drive Bays
- SAS or enterprise SATA HDD only recommended
|
|
Backplane |
- SAS-2 dual expander backplane, features:
- Scalability through cascading
- 6Gb SAS2/SATA2 HDD support
- Inband SES-2 Enclosure Management
- Redundancy dual ported SAS architecture
- Robust AirMax server node connections (SBB specification)
|
|
System Cooling |
Fans | 12x PWM Fans |
|
Power Supply |
Redundant 1200 W high-efficiency power supply with PMBus |
AC Input | - 1000 W Output @ 100-140 V, 11.5-8 A, 50-60 Hz
- 1200 W Output @ 180-240 V, 8-5.5 A, 50-60 Hz
|
DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1200 W: +12 V / 100 A; +5V sb / 4 A
|
DC Output with PDB | - +5 V: 50 A
- +3.3 V: 30 A
- -12V: 0.6 A
|
Certification | Gold Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
FAN | Total of 12 fan headers supporting up to 12 fans |
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 12x fan connectors
- PECI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|