|
Product SKUs |
SYS-6037R-72RFT+ | SuperServer 6037R-72RFT+ (Black) |
|
Motherboard |
Super X9DR7-TF+ |
|
Processor/Cache |
CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 135 W TDP *)
- * Please contact your Supermicro sales representative for additional details
|
Note | BIOS version 3.0 or above is required |
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Up to 1.5 TB DDR3 ECC LRDIMM
- Up to 768 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602J chipset |
SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1, 5, 10
|
SAS | - SAS-2 via LSI 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | Nuvoton W83527HG |
|
Input / Output |
Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
SAS | 8x SAS-2 ports (6 Gb/s) |
LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 4x Rear USB 2.0 ports
- MB: 4x rear + 4x via header + 1x Type A
|
VGA | 1x VGA port |
Serial Port / Header | 2x Fast UART 16550 ports: 1 rear and 1 header |
|
Chassis |
Form Factor | 3U Rackmount |
Model | CSE-835BTQ-R1K28B |
|
Dimensions |
Width | 17.2" (437mm) |
Height | 5.2" (132 mm) |
Depth | 25.5" (648 mm) |
Weight | Gross: 74.8lbs (34kg) / Net: 48lbs (21.8kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 Full-height Full-length (support 2x GPU/Xeon Phi cards)
- 4x PCI-E 3.0 x8 slots
- Without GPU installed, can support 5x Full-height Full-length, and 1x half length PCI-E card
- With 2x GPU installed, can support 1x Full-height, Full-length and 1x Half-length PCI-E cards (both CPUs need to be installed for full access to PCI-E slots. See manual for details)
|
|
Drive Bays |
Hot-Swap | - 8x 3.5" Hot-swap SAS/SATA HDD trays
- SAS or enterprise SATA HDD only recommended
|
Peripheral Bays | 2x 5.25" Peripheral Drive Bay |
|
Backplane |
1x SAS-2 / SATA backplane |
|
System Cooling |
Fans | - 4x 8cm 9.5K RPM, Middle fans
- 2x 8cm 6.7K RPM, Rear Exhaust fan
|
|
Power Supply |
1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input | - 1000 W Output @ 100-140 V, 12-8 A, 50-60 Hz
- 1280 W Output @ 180-240 V, 8-6 A, 50-60 Hz
|
DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
Certification | Platinum Certified |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|