|
Product SKUs |
SSG-6048R-E1CR60N | SuperServer 6048R-E1CR60N (Black) |
|
Motherboard |
Super X10DSC+ |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 160W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
Memory Capacity | - 24x 288-pin DDR4 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 768 ECC RDIMM
|
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM:
- 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
|
On-Board Devices |
Chipset | Intel® C612 chipset |
SAS | - SAS3 (12Gbps) via LSI 3108 (optional SuperCap)
- HW RAID 0, 1, 5, 6, 10, 50, 60
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | SIOM support for flexible networking options |
Graphics | ASPEED AST2400 BMC |
|
Input / Output |
USB | 3 USB 3.0 ports (2 rear + 1 Type A) |
VGA | 1x VGA port |
Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
|
Chassis |
Form Factor | 4U Rackmount |
Model | CSE-946STS-R2K05P |
|
Dimensions and Weight |
Width | 17.2" (437mm) |
Height | 7" (178 mm) |
Depth | - 30.2" (767mm)
- With Cable Management Arm Installed:35.2" (895mm)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
LCD | - 3.5" TFT LCD panel
- Full-Color display with 320x480 pixels
- Real-time system status from IPMI
- Easy read graphical User Interface
|
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slots
|
|
Drive Bays |
Hot-Swap | - 60x 3.5" Hot-swap SAS3/SATA3 drive bays
- 2x 2.5" rear Hot-swap SATA drive bays
|
Optional | 6 NVMe bays (optional) |
|
Backplane |
SAS3/SATA3 single expander per backplane |
|
System Cooling |
Fans | - 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
|
|
Power Supply |
2000W Redundant Power Supplies with PMBus |
Total Output Power | 1000W/1800W/1980W/2000W |
Dimension(W x H x L) | 73.5 x 40 x 265 mm |
Input | - 100-120Vac / 12-9.5A / 50-60Hz
- 200-220Vac / 10-9.5A / 50-60Hz
- 220-230Vac / 10-9.8A / 50-60Hz
- 230-240Vac / 10-9.8A / 50-60Hz
- 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
+12 V | - Max: 83.3A / Min: 0A (100-120Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 166.7A / Min: 0A (230-240Vac)
- Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
12Vsb | Max: 2.1A / Min: 0A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|