| |
Product SKUs |
| SSG-6048R-E1CR90L | SuperServer 6048R-E1CR90L (Black) |
| |
Motherboard |
| Super X10DSC-TP4S |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
System Memory |
| Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 1TB ECC 3DS LRDIMM, 256GB ECC RDIMM
|
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM:
- 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | Intel® C612 chipset |
| SAS | 2 Onboard LSI 3008 SAS3 controllers |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Quad LAN with Intel® XL710 10G SFP+
- SIOM card for multiple IO options
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| LAN | - 4 10G SFP+ LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2 USB 3.0 ports (rear)
- 4 USB 2.0 ports (2 rear + 2 via headers)
|
| VGA | 1x VGA port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 4U Rackmount |
| Model | CSE-946E1C-R3KB |
| |
Dimensions and Weight |
| Width | 17.6" (447mm) |
| Height | 7" (178 mm) |
| Depth | 35.66" (906mm) |
| Weight | - Gross Weight: 235 lbs (106.6 kg)
- Net Weight: 160 lbs (72.6 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- Unit Identification (UID) button
|
| LEDs | - Power status LED
- Hard drive activity LED
- Network activity LEDs
- System information LED
- Power fail LED
|
| |
Drive Bays |
| Hot-Swap | - 90x 3.5" Hot-swap SAS3/SATA3 drive bays
- 2x 2.5" rear Hot-swap SATA drive bays
|
| |
Backplane |
| SAS3/SATA3 single expander per backplane |
| |
System Cooling |
| Fans | 5x 8cm hot-swap redundant PWM cooling fans |
| |
Power Supply |
| 1000W Redundant Power Supplies with PMBus |
| Total Output Power | 800W/1000W |
| Dimension(W x H x L) | 73.5 x 40 x 185 mm |
| Input | - 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
|
| +12 V | - Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
|
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
