| |
Product SKUs |
| SYS-7047R-3RF4+ | SuperServer 7047R-3RF4+ (Black) |
| |
Motherboard |
| Super X9DR3-LN4F+ |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Up to 1.5 TB DDR3 ECC LRDIMM
- Up to 768 GB DDR3 ECC registered memory (RDIMM)
- Up to 192 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C606 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1, 5, 10
|
| SAS | - SAS from C606
- RAID 0, 1, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond BMC
|
| Network Controllers | - Intel i350 Gigabit Ethernet controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video | G200 (Nuvoton WPCM450 BMC with graphic controller) |
| Super I/O | Nuvoton W83527 |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
| SAS | 8x SAS ports via C606 |
| LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x Front USB 2.0 + 4x Rear USB 2.0 ports
- MB: 4x rear + 4x via header + 1x Type A
|
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 ports |
| |
Expansion Slots |
| PCI-Express | - 4x PCI-E 3.0 x16 (Full-height, Full-length)
- 1x PCI-E 3.0 x8 (Full-height, Full-length)
- 1x PCI-E 3.0 x4 (in x8)(Full-height, Full-length)
|
| |
System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Chassis |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model | CSE-745TQ-R920B |
| |
Dimensions |
| Height | 17.2" (437mm) |
| Width | 7.0" (178 mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 73.5 lbs (33.6 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | 8x Hot-swap 3.5" SAS/SATA Drive Trays |
| Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay that fits 3.5" bay devices
|
| |
SAS / SATA Backplane |
| SAS / SATA Hard Drive Backplane w/ AMI MG9072 |
| |
System Cooling |
| Fans | - 3x 5000 RPM Hot-swap PWM Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
|
| |
Power Supply with Power Distributor |
| 920 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I²C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
| DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - System info. LED: UID indicator, fan fail/System Overheat
- Supsend-State Indicator LED
- UID/Remote LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Artikel
