| |
Product SKUs |
| MBD-X10DRG-HT -B | X10DRG-HT (for server SKUs only) |
| |
Physical Stats |
| Form Factor | Proprietary |
| Dimensions | 19.8" x 9.2" (50.29cm x 23.37cm) |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Video | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 4x USB 3.0 ports (2 rear, 2 via header)
- 2x USB 2.0 ports (2 via headers)
|
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| DOM | 2x SuperDOM (Disk on Module) ports |
| TPM | 1x TPM 1.2 20-pin Header |
| |
Chassis (Optimized for X10DRG-HT ) |
| 1U Chassis | CSE-118GH-R1K66B |
| 2U Chassis | CSE-218GH-R2K03B |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended. |
| |
SuperServer(s) with X10DRG-HT |
| Model(s) | - SYS-1028GR-TRT
- SYS-2028GR-TRHT
- SYS-2028GR-TRT
|
| |
Expansion Slots |
| PCI-Express | - 4 PCI-E 3.0 x16
- 1 PCI-E 3.0 x8 (in x16)
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Management |
| Software | - Intel® Node Manager
- SuperDoctor® 5
- IPMI 2.0
- NMI
- SPM
- SUM
- Watch Dog
|
| Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN | - 12x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - Suspend Static indicator LED
- UID/Remote UID
|
| Other Features | RoHS |
| |
Operating Environment |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
0 Artikel
