| |
Product SKUs |
| MBD-X10DRH-C -O | X10DRH-C (Retail Pack) |
| MBD-X10DRH-C -B | X10DRH-C (Bulk Pack) |
| |
Physical Stats |
| Form Factor | E-ATX |
| Dimensions | 12" x 13" (30.5cm x 33.2cm) |
| |
Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SAS | LSI 3108 SAS3 (12Gbps) controller; 2GB cache; HW RAID 0, 1, 5, 6, 10, 50, 60 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Video | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
- 4x USB 2.0 ports (2 rear + 2 via header)
|
| Video | 1x VGA Connector |
| Serial Port / Header | - 2x Fast UART 16550 serial
- 2x COM Ports (1 rear, 1 header)
|
| DOM | 2x SuperDOM (Disk on Module) ports |
| TPM | 1x TPM 1.2 20-pin Header |
| |
Chassis (Optimized for X10DRH-C ) |
| 2U Chassis | - CSE-213AC-R920LPB
- CSE-216BE1C-R920LPB
- CSE-216BE2C-R920LPB
- CSE-826BE1C-R920LPB
- CSE-826BE2C-R920LPB
|
| 3U Chassis | CSE-835TQ-R920B |
| Mid-Tower | - CSE-732D4F-903B
- CSE-732i-865B
|
| Tower / 4 U Rackmount | - CSE-743TQ-1200B
- CSE-745TQ-R920B
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended. |
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x16
- 6x PCI-E 3.0 x8
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
Management |
| Software | - Intel® Node Manager 3.0
- IPMI 2.0
- SPM
- SUM
- SuperDoctor® 5
- NMI
- Watch Dog
|
| Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID/Remote UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
Operating Environment |
| Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range | 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |
0 Artikel
