| |
Product SKUs |
| MBD-X10SLL-F | X10SLL-F (Bulk Pack) |
| |
Physical Stats |
| Form Factor | uATX |
| Dimensions | 9.6" x 9.6", (24.4cm x 24.4 cm) |
| |
Processor/Cache |
| CPU | - Intel Xeon processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C222 Express PCH |
| SATA | - SATA-3 (6 Gb/s) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Aspeed AST2400 with 10/100/1000M bps MAC
|
| Network Controllers | - Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| VGA | BMC integrated Aspeed AST2400 |
| |
Input / Output |
| Serial ATA | - 2x SATA-3 (6 Gb/s) ports
- 4x SATA2 (3Gbps) ports
|
| LAN | - 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x USB 3.0 ports (1 Type-A, 1 via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
|
| VGA | 1x VGA D-Sub Connector |
| Serial Port / Header | 2x COM ports (1 rear, 1 header) |
| DOM | SATA DOM (Disk on Module) power connector support |
| TPM | 1x TPM 1.2 20-pin Header |
| |
Chassis (Optimized for X10SLL-F ) |
| 1U Chassis: | - SC113MTQ-330CB
- SC113MTQ-R400CB
- SC811TQ-441B
- SC813MTQ-350CB
- SC813MTQ-441CB
- SC813MTQ-R400CB
|
| 3U / Mid-Tower Chassis: | - SC731i-300B
- SC732D4-500B
- SC732D4-865B
- SC732D4-903B
- SC733TQ-500B
- SC733TQ-665B
|
| Mini-ITX Chassis: | |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended. Please talk to your sales representative for details. |
| |
SuperServer(s) with X10SLL-F |
| Model(s) | |
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 3.0 x8 slot
- 1x PCI-E 2.0 x4 (in x8) slot
|
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
PC Health Monitoring |
| Voltage | - Monitors for CPU cores, +12 V, +3.3 V, +5 V, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
| FAN | - Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
0 Artikel
